Step 1
Trim foot as usual.
Step 2
Clean the outside of the hoof wall removing any debris, dirt and oils with the file or hoof buffer.
Step 3
Shape the shoe to the foot on the anvil like a normal horse shoe. Make sure fits tight.
Step 4
Pour the glue until an even mix is achieved.
Step 5
Apply the glue to the inside of the cuff. Do not use excessive glue. 1 to 2 mm of thickness is suficient
Step 6
Wrap foot and shoe with plastic foil.
Step 7
Hold the foot until glue is hard. (2-5 min, depending on temperature)
Step 8
Apply a bed of glue around the cuff.
Step 9
Re-wrap the foot and smooth the glue with your fingers.
Step 10
File or buff the glue until smooth.
Step 11
All done!